29
28
30
31
7.Group Device
8. Mood Control (Scenario)
7.Group Device
7.Group Device
7.7 Delete All Devices in All Groups
To delete all devices in all groups, perform following
steps.
1- Press the "Navigation" button to enter Menu, then
select "Group Config" and scroll down to find "Del
All Gps"
2- Press "Yes" button to delete all devices in all groups.
The Wireless remote controller will show "Del All
Device in Groups?", User may press "Yes" button again
to confirm deleting the devices or press "Back" button
to cancel.
3- If all the devices are deleted successfully, the
Wireless remote controller will show "Complete!"
7.8 Advanced Function
7.8.1 Edit Group Name
To edit the name of a group, perform following
steps.
1- Press the "Navigation" button to enter Menu, then
select "Group Config" and select the target
group, then scroll down to find "Edit Name"
2- Press "Yes" button to edit the name of selected
group.
"Left/Right" buttons: Change the position of
cursor
"ALL OFF" button" Change the case (a/A/1)
"ALL ON" button: Backspace
"Yes" button: Save the name
"Back" Button: Cancel edit name
7.8.2 Show Device Address
To view the unique address of the device, perform
following steps.
1- Press the "Navigation" button to enter Menu,
then select "Group Config", select the target
group and select the target device in the
target group
2- Press "Yes"button to enter the device option
menu, and then select "Show Address"
3- Press "Yes" button again show the unique
address of all the device.
7.8.3 Edit Device Name
To edit the device name of grouped device, perform
following steps
1- Press the "Navigation" button to enter Menu,
then select "Group Config", select the target
group and select the target device in the
target group.
2- Press "Yes" button to enter the device option
menu, and then select "Edit Name".
3- Press "Yes" button to edit the name of
selected device.
"Left/Right" buttons: Change the position of
cursor
"ALL OFF" button" Change the case (a/A/1)
"ALL ON" button: Backspace
"Yes" button: Save the name
"Back" Button: Cancel edit name
After the CG100 devices are installed and configured, user may add devices to different
scenario (Mood 1 to Mood 5) for mood control. The procedures of adding device to Mood and
controlling devices by Mood are illustrated in Section 8.1 and Section 8.2-8.3 respectively.
8.1 Add Device to Mood
To add a device to a mood control, perform following
steps.
1- Connect the Wireless remote controller(which is
configured before) to the desired device (eg. One-gang
Switch, Two-gang Switch, Dimmer Switch, Socket,
etc.) through the provided cable.
2- Press the "Navigation" button to enter Menu, then
select "Mood Config".
(Note: All the moods will show on the screen, user
may scroll to view the moods.)
(Note: If there is any device added to the mood, the
Wireless remote controller will show the name of the
mood. Eg. The default mood name of the first mood is
"Mood 1")
(Note: IF there is no device added to the mood, the
Handheld will show "(Empty)".)
3- Press "Yes" button to select the desired mood.
(Note: If there is no device added to the mood, the
Wireless remote controller will show "No Device".)
(Note: If there is/are device(s) added to the mood,
the Wireless remote controller will show the name and
corresponding action of the device.)
4- Scroll down to find "Add Device"
5- Press "Yes" button to add device.
The Wireless remote controller will show "Press
Desired Device", and the status LED of connected
device will keep flashing
6- Press the desired device control button on the
device to add the device to the mood.
For example, when the Wireless remote controller is
connecting with the Two-gang Switch and user
press the second of the switch, the device control
function of the second load of the switch will add to
the mood.