background image

 

 

 

 

Leak Detection 

– Manual V1.0 

 

 

Contents 

 

Introduction ......................................................................................................................................................... 1 

Wired water leak sensor (ORC-LEAK-WD-WH) .................................................................................................... 2 

Specification .................................................................................................................................................... 2 

Installation ....................................................................................................................................................... 2 

Wiring to Orcomm Smart Touch Screen (V1 pre 6/2018 models) .................................................................. 3 

Wiring to Orcomm Smart Touch Screen (V2 8/2018 onwards)....................................................................... 3 

Wiring to Orcomm ORC-HAGW (V1) ............................................................................................................... 4 

Testing the sensor ........................................................................................................................................... 4 

More information Links ....................................................................................................................................... 4 

ORC-LEAK-WD-WH .......................................................................................................................................... 4 

Smart Home ..................................................................................................................................................... 4 

 

 

 

Introduction 

 

This guide is designed to help understand orcomm offering for Water Leak detection via the 
Smart Home system.  

For further installation instructions, please refer to the Orcomm Smart Home Touch Screen 
Installation manual available at 

www.orcomm.co.uk/downloads

. 

 

 

 

Summary of Contents for ORC-LEAK-WD-WH

Page 1: ...ouch Screen V2 8 2018 onwards 3 Wiring to Orcomm ORC HAGW V1 4 Testing the sensor 4 More information Links 4 ORC LEAK WD WH 4 Smart Home 4 Introduction This guide is designed to help understand orcomm offering for Water Leak detection via the Smart Home system For further installation instructions please refer to the Orcomm Smart Home Touch Screen Installation manual available at www orcomm co uk ...

Page 2: ...perature 10 to 65 C Wire cored up to 350mm length Wire termination Red White Output type NPN type Installation This unit is designed for one use application Once the unit has been submerged in water it must be replaced Please follow the instructions of the monitoring device for any additional installation requirements The Water Leak detection requires voltage to work correctly It is NOT a passive ...

Page 3: ...measure 4 to 5V DC in standby mode When Zones 1 8 are pulled below 1V DC the alarm will trigger Wiring to Orcomm Smart Touch Screen V2 8 2018 onwards The below can be followed when installing with monitors Version 2 Touch Screen Monitor will need to be set in 3C mode Voltage will measure between 2 to 3V DC in standby mode When Zones 1 8 are pulled higher than 4V DC the alarm will trigger ...

Page 4: ... Analogue Input is pulled down more than 1V DC the alarm will trigger Testing the sensor When testing the sensor short the 2 blades on the water leak sensor together with a metal wire The monitoring device will then detect the connection and trigger as per designed application More information Links ORC LEAK WD WH https www orcomm co uk product orc leak wd wh Smart Home https www orcomm co uk prod...

Reviews: