Operation
Front Panel Controls and LED Indicators
Shown below are the controls and indicator lights on the front of CPI-500 /
1000
Figure 1 Front Panel of CPI-500 / 1000
Power
On/Off
Power on/off button is shown as above. Once Inverter has been properly
installed and batteries are connected, press this button and Inverter will turn
on automatically, and works in mains mode or inverter mode according to
input AC source’s status. When press this button again, Inverter will turn off
automatically.
Mains Mode LED
The green LED will blink or light steadily when power mains is normal.
Note: The green LED blinks every 2 seconds to indicate that battery capacity
is not full enough and battery is being charged by high rate.
Inverter Mode LED
The Yellow LED will light when power mains is abnormal. And unit will work
in inverter mode.
Fault LED
The red LED will light when fault occurs.
