AC Connection
Before having AC connection, match the power requirements of connected
devices with the power output of Inverter to avoid overload. Consult a
qualified electrician, and follow local code for the proper wire sizes,
connectors and conduit requirements.
Step 1
- A three-station terminal block is provided to make AC input
connections. Remove the cover plate.
Caution!!
Be sure that AC source is disconnected before attempting to
connect AC power cables and load to Inverter.
Step 2-
Connect the hot wire (black/brown)
of AC input cable to the HOT IN terminal.
Step 3-
Connect the neutral wire (white/blue)
of AC input cable to the NEU IN terminal
Step 4-
Connect the ground wire
(green) of AC input cable
to the GND IN terminal
Step 5-
Tighten screws to affix wires
in terminal block.
Step 6-
Cover up the AC Input by the
plastic cover.
Step 7-
Simply plug your equipment(s)
into the output receptacle(s).
Step 8-
Turn on Inverter when you are
using connected equipment(s).
Figure 5 AC Input Connections
