________________________________________________________ 15
Chapter 1: Setup
_________________________________________________________________
4. Slide the ribbon down into position between the printhead and
the metal ribbon mask. This is easy to do! Do not force the
ribbon between the ribbon mask and the ribbon guide {the
black plate closest to the platen}. See Figure 1-5.
5. Turn the knob clockwise, and advance the ribbon until there
is no slack.
6.
Slide the printhead right and left a few times to be sure that it
moves smoothly without snagging the ribbon.
7.
If you are installing a ribbon that is not the same type as the
ribbon it replaces, be sure to select the correct type with the
VuePrint menu or the Command-Vue INSTALL menu. See
Chapter 2 for more information on making these settings.
Figure 1-5.Iinstall the ribbon cassette.
