42 Version:
BB
Document Number: G-SIP3D-RUC
C
ONFIGURING
P
ORTICO
TVA
USING THE
W
EB
MI
I
NSTALLATION AND
C
ONFIGURATION
G
UIDE
12
AND
24 P
ORT
P
ORTICO
TVA
Entering and Applying the Settings
Information entered into the
Add Lines
page will be applied to the same
line across a range of ports.
1.
Enter configuration settings using the information provided in
Table 9
as
a guide
2.
In the
Apply to
section at the bottom of the page, specify the range
of points that you want to change by selecting the
Start Port
and the
End Port
from the list.
3.
Select the
Line
to which you want to apply the changes. The changes
will be applied to the same line for each port in the range.
4.
When you are happy with your changes, click
Submit
.
5.
If you need to make changes for individual lines, follow the instructions
in “Configuring the Lines for an Individual Port” on page 4 4 and reboot
the port(s).
Configuration Settings
The examples of the configuration in this document use IP addresses to identify
Portico TVA and other network components. Unless otherwise stated, you can also
use an FQDN (fully qualified domain name).
The configuration settings listed in
Table 9
can be set whether you
are configuring an individual port or a range of ports.
The settings that are only available when configuring individual ports
are specified in
Table
10
.
Option
Purpose
Addressing
SIP Address-of-Record
(AoR)
Represents an identity for the user in the
format,<
user
>@<
Softswitch IP
>. For
example:
Extension Numbers
Start Extension Number
The line programming starts at this
extension number.
Increment
The extension is incremented by this number for
the next extension to change. For example, if 1 is
entered and the extensions start at 5001 the
next DN changed would be 5002.
Table 9: Port and Line Configuration Settings
