22
Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
The Wireless Tab - Basic Wireless Settings
Wireless-N Gigabit Router with Storage Link
The Wireless Tab - Basic Wireless Settings
The basic settings for wireless networking are set on this screen.
Basic Wireless Settings
Network Mode
. If you have wireless devices in your network, keep the default setting,
Mixed
. If you do not have
any wireless devices in your network, select
Disable
.
Network Name (SSID)
. The SSID is the network name shared among all points in a wireless network. The SSID
must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 characters
(use any of the characters on the keyboard). Make sure this setting is the same for all points in your wireless
network. For added security, you should change the default SSID (
linksys
) to a unique name.
Radio Band
. For best performance in a network using Wireless-N, Wireless-G and Wireless-B devices, keep the
default,
Wide - 40MHz Channel
. For Wireless-G and Wireless-B networking only, select
Standard - 20MHz
Channel
.
Wide Channel
. If you selected Wide - 40MHz Channel for the Radio Band setting, then this setting will be
available for your primary Wireless-N channel. Select any channel from the drop-down menu.
Standard Channel
. Select the channel for Wireless-N, Wireless-G, and Wireless-B networking. If you selected
Wide – 40MHz Channel for the Radio Band setting, then the Standard Channel will be a secondary channel for
Wireless-N.
SSID Broadcast
. When wireless clients survey the local area for wireless networks to associate with, they will
detect the SSID broadcast by the Router. To broadcast the Router's SSID, keep the default setting,
Enabled
. If you
do not want to broadcast the Router's SSID, then select
Disabled
.
When you have finished making changes to this screen, click the
Save Settings
button to save the changes, or
click the
Cancel Changes
button to undo your changes. Help information is available on the right side of the
screen.
Figure 5-14: Wireless Tab - Basic Wireless Settings
NOTE:
If you select Wide - 40MHz Channel for the
Radio Band setting, then Wireless-N can use two
channels: a primary one (Wide Channel) and a
secondary one (Standard Channel). This will
enhance Wireless-N performance.
