manualshive.com logo in svg

Cisco WRT350N, Quick Installation Manual

The Cisco WRT350N, a high-performance wireless router, is a reliable solution for seamless connectivity. Get started instantly with the Quick Installation Manual, available for free download from manualshive.com. This comprehensive manual ensures easy setup and configuration, optimizing your network experience.

Share
Download
background image

73

Appendix D: Windows Help

Wireless-N Gigabit Router with Storage Link

Appendix D: Windows Help

Almost all Linksys wireless products require Microsoft Windows. Windows is the most used operating system in 
the world and comes with many features that help make networking easier. These features can be accessed 
through Windows Help and are described in this appendix.

TCP/IP

Before a computer can communicate with the Router, TCP/IP must be enabled. TCP/IP is a set of instructions, or 
protocol, all PCs follow to communicate over a network. This is true for wireless networks as well. Your PCs will 
not be able to utilize wireless networking without having TCP/IP enabled. Windows Help provides complete 
instructions on enabling TCP/IP.

Shared Resources

If you wish to share printers, folder, or files over your network, Windows Help provides complete instructions on 
utilizing shared resources.

Network Neighborhood/My Network Places

Other PCs on your network will appear under Network Neighborhood or My Network Places (depending upon the 
version of Windows you're running). Windows Help provides complete instructions on adding PCs to your 
network.

Summary of Contents for WRT350N













































































































































































































Reviews:

No comments

Related manuals for WRT350N

D-Link NetDefend DFL-260E Reference Manual preview
NetDefend DFL-260E
Brand: D-Link Pages: 328
D-Link ShareCenter Pulse DNS-320 Quick Install Manual preview
ShareCenter Pulse DNS-320
Brand: D-Link Pages: 2
D-Link DFL-210 - NetDefend - Security Appliance Firewall Registration Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 19
D-Link DFL-M510 Faq preview
DFL-M510
Brand: D-Link Pages: 22
Dahua N300 Quick Start Manual preview
N300
Brand: Dahua Pages: 12
D-Link NetDefend DFL-1600 Quick Manual preview
NetDefend DFL-1600
Brand: D-Link Pages: 23
H3C s5800 series Quick Start Manual preview
s5800 series
Brand: H3C Pages: 33
H3C S5500-SI Series Operation Manual preview
S5500-SI Series
Brand: H3C Pages: 1217
3Com MSR 50 Series Configuration Manual preview
MSR 50 Series
Brand: 3Com Pages: 2443
H3C SR6600 Series Installation Manual preview
SR6600 Series
Brand: H3C Pages: 3
H3C SR6616 Installation, Quick Start preview
SR6616
Brand: H3C Pages: 4
DCE ANS-205 User Manual preview
ANS-205
Brand: DCE Pages: 5
NETGEAR FS605 v3 Installation Manual preview
FS605 v3
Brand: NETGEAR Pages: 84
QNAP TS-1283XU-RP User Manual preview
TS-1283XU-RP
Brand: QNAP Pages: 54
Delta Electronics LonWorks Communication Module LN-01 Instruction Sheet preview
LonWorks Communication Module LN-01
Brand: Delta Electronics Pages: 1
ADTRAN TRACER 5045 Manual preview
TRACER 5045
Brand: ADTRAN Pages: 9
Teldat G1N Installation Manual preview
G1N
Brand: Teldat Pages: 23
Ubiquiti EdgeRouter X Quick Start Manual preview
EdgeRouter X
Brand: Ubiquiti Pages: 20

Brands by name

Popular brands

Load more brands