Table 9: LED Diagnostic Status
Speaker
Mute
Hold
MWI
Hardware test
On
On
On
On
Power is Ready
On
On
On
—
Flash is Accessible
On
On
—
—
RAM Test Successful
On
—
—
—
Ethernet Test Successful
2
The screen displays the Cisco Systems, Inc., logo screen.
3
This message appears as the phone starts up:
Phone not registered
4
The home screen displays:
•
Current date and time
•
Primary directory number
•
Additional directory numbers and speed dial numbers, if configured (only on Cisco Unified IP Phone
8941)
•
Softkeys
If the phone successfully passes through these stages, it has started up properly.
Related Topics
Startup Problems, on page 167
Cisco IP Phone Does Not Go Through the Normal Startup Process, on page 167
Configure Phone Services for Users
You can give users access to Cisco IP Phone Services on the IP phone. You can also assign a button to different
phone services. These services comprise XML applications and Cisco-signed Java midlets that enable the
display of interactive content with text and graphics on the phone. The IP phone manages each service as a
separate application. Examples of services include local movie times, stock quotes, and weather reports.
Before a user can access any service:
•
You must use Cisco Unified Communications Manager Administration to configure services that are
not present by default.
•
The user must subscribe to services by using the Cisco Unified Communications Self Care Portal. This
web-based application provides a graphical user interface (GUI) for limited, end-user configuration of
IP phone applications. However, a user cannot subscribe to any service that you configure as an enterprise
subscription.
For more information, see the documentation for your particular Cisco Unified Communications Manager
release.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
and SIP)
41
Configure Phone Services for Users
