Cisco Unified IP Phone 8941 Administration Manual Download Page 26

Page: 26 / 208

Usage notes

Purpose

Network protocol

The Cisco Unified IP Phone
supports LLDP-MED on the
SW port to communicate
information such as:

•

Voice VLAN
configuration

•

Device discovery

•

Power management

•

Inventory management

For more information about
LLDP-MED support, see the
LLDP-MED and

Cisco

Discovery Protocol

white

paper:

http://www.cisco.com/

en/US/tech/tk652/tk701/
technologies_white_
paper0900aecd804cd46d.shtml

LLDP-MED is an extension of the LLDP
standard developed for voice products.

Link Layer Discovery
Protocol-Media Endpoint
Devices (LLDP-MED)

Cisco Unified IP Phones use
the RTP protocol to send and
receive real-time voice traffic
from other phones and
gateways.

RTP is a standard protocol for transporting
real-time data, such as interactive voice and
video, over data networks.

Real-Time Transport
Protocol (RTP)

RTCP is disabled by default,
but you can enable it on a per
phone basis by using Cisco
Unified Communications
Manager.

RTCP works in conjunction with RTP to provide
QoS data (such as jitter, latency, and round trip
delay) on RTP streams.

Real-Time Control
Protocol (RTCP)

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0

(SCCP and SIP)

Network Protocols

Summary of Contents for Unified IP Phone 8941

















































































































































































































Search results

Summary of Contents for Unified IP Phone 8941

Reviews:

Related manuals for Unified IP Phone 8941

Brands by name

Popular brands

Cisco Unified IP Phone 8941, Administration Manual

Search results

Summary of Contents for Unified IP Phone 8941

Reviews:

Related manuals for Unified IP Phone 8941

Brands by name

Popular brands