Cisco Unified IP Phone 8941 Administration Manual Download Page 136

Page: 136 / 208

You can take any of these actions to turn on the display any time it is off:

•

Press any button on the phone.

The phone takes the action designated by that button in addition to turning on the display.

•

Lift the handset.

When you turn the display on, it remains on until the phone has remained idle for a designated length of time,
then it turns off automatically.

Procedure

Step 1

In Cisco Unified Communications Manager Administration, select

Device

Phone

Step 2

Locate the phone that you need to set up.

Step 3

Navigate to the Product Specific Configuration area and set the following fields:

•

Days Display Not Active

•

Display On Time

•

Display On Duration

•

Display Idle Timeout

Table 17: PowerSave Configuration Fields

Description

Field

Days that the display does not turn on automatically at the time specified in the
Display On Time field.

Choose the day or days from the drop-down list. To choose more than one day,
Ctrl-click each day that you want.

Days Display Not Active

Time each day that the display turns on automatically (except on the days
specified in the Days Display Not Active field).

Enter the time in this field in 24-hour format, where 0:00 is midnight.

For example, to automatically turn the display on at 07:00 a.m., (0700), enter

07:00

. To turn the display on at 02:00 p.m. (1400), enter

14:00

If this field is blank, the display will automatically turn on at 0:00.

Display On Time

Length of time that the display remains on after turning on at the time specified
in the Display On Time field.

Enter the value in this field in the format

hours:minutes

For example, to keep the display on for 4 hours and 30 minutes after it turns on
automatically, enter

04:30

If this field is blank, the phone will turn off at the end of the day (0:00).

If Display On Time is 0:00 and the display on duration is blank (or
24:00), the display will remain on continuously.

Note

Display On Duration

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0

(SCCP and SIP)

122

Schedule Power Save for Cisco IP Phone

Summary of Contents for Unified IP Phone 8941

















































































































































































































Search results

Summary of Contents for Unified IP Phone 8941

Reviews:

Related manuals for Unified IP Phone 8941

Brands by name

Popular brands

Cisco Unified IP Phone 8941, Administration Manual

Search results

Summary of Contents for Unified IP Phone 8941

Reviews:

Related manuals for Unified IP Phone 8941

Brands by name

Popular brands