Cisco TOPSPIN SFS 3012 Hardware Manual Download Page 51 | Manualshive

Page: 51 / 79

background image

33

Viewing and Updating the Software Image on the
Chassis

View the Software Image Version with the CLI

1. To view the primary software image version for all cards in the chassis, use the

show

card-inventory

command. Look for the

primary-image-source

field for each slot. (The slots are

described in

Figure 1-2

.)

2. Note that it is possible to have different versions of software installed on different slots. To update

an individual Fibre Channel or Ethernet Gateway, perform the steps as described here, but you do
not need to reboot the chassis. After the copy and installation, you can enable and disable an
individual gateway to activate the new image.

Example

3. To view all existing boot images that exist on the chassis (whether or not they are currently being

used), use the

dir image

command.

A

.img

file is an image file that is not installed.

Topspin-360#

show card-inventory

================================================================================
          Card Resource/Inventory Information
================================================================================
        slot-id : 1
      used-memory : 77040 (kbytes)
      free-memory : 50272 (kbytes)
   used-disk-space : 45048 (kbytes)
   free-disk-space : 57331 (kbytes)
   last-image-source : TopspinOS-2.0.0/build495

primary-image-source : TopspinOS-2.0.0/build495

          image : TopspinOS-2.0.0/build495
      cpu-descr : PPC 440GP Rev. C - Rev 4.129 (pvr 4012 0481)
   fpga-firmware-rev : 6
   ib-firmware-rev : 200000000

        slot-id : 10
      used-memory : 47676 (kbytes)
      free-memory : 34948 (kbytes)
   used-disk-space : 8909 (kbytes)
   free-disk-space : 33361 (kbytes)
   last-image-source : TopspinOS-2.0.0/build495
   primary-image-source : TopspinOS-2.0.0/build495
          image : TopspinOS-2.0.0/build495
<output truncated>

«
...
49
50
51
52
53
...
»

Summary of Contents for TOPSPIN SFS 3012
















































































Reviews:

No comments

Related manuals for TOPSPIN SFS 3012

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 281

Brand: I-Tech Pages: 27

S5560S-EI Series

Brand: H3C Pages: 37

OfficeConnect WX4400

Brand: 3Com Pages: 528

Brand: Tecsis Pages: 2

PAT TRS 05 / PATB3

Brand: Hirschmann Pages: 12

Brand: NETGEAR Pages: 8

Brand: Omron Pages: 16

Brand: B&B Electronics Pages: 22

LS-5500-28C-PWR-SI-OVS

Brand: H3C Pages: 86

Brand: Mach Power Pages: 12

Brand: Hamlet Pages: 4

CT.TS005.003902

Brand: Talkswitch Pages: 309

VH M 1 1 1 Series

Brand: Jlso Tec Trade Pages: 15

Brand: Jerguson Pages: 16

Brand: Clas Ohlson Pages: 5

OpenGear DSS-8224

Brand: Ross Pages: 47

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands