Cisco TOPSPIN SFS 3012, Hardware Manual

Page: 50 / 79

32
To remove a cable with a pull connector, grasp the connector with one hand and push it toward the port,
then pull the latch away from the port with your other hand and gently wiggle the connector away from
the port.
Figure 3-12: Removing a Pull Connector
Manage the Topspin 360
You can manage the Topspin 360 with the following methods:
•
Command Line Interface (CLI) - a text-based interface accessible through a direct serial
connection, Telnet over IP, or SSH over IP.
• Element Manager (GUI) - A graphical interface installed on a workstation, accessible over IP.
• Chassis Manager (GUI) - A graphical interface that you access with a Web browser.
Refer to the Element Manager User Guide , Chassis Manager User Guide , and the CLI Reference Guide
for more information about managing the Topspin 360.
1. push connector toward port
2. pull latch away from port
3. pull connector away from port