Cisco SVP2000P, User Manual

Page: 9 / 51

STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email:
7. Press or Soft3 (Quit) thrice return to standby, at this time the phone is trying to change to PPPoE mode. Press
for checking the status. If the screen shows “
PPPoE Server; if it shows an IP address, then the phone has already get IP with PPPoE.
Setting Static IP mode (static ADSL/Cable, or no PPPoE / DHCP network)
1. Prepare the network’s parameters first, such as IP Address, Net mask, Default Gateway and DNS server IP address. If you
don’t know this information, please contact the service provider or technician of network.
2. Press , then press twice, chooses “
3. Press "OK" or Soft2 (Enter), then choose “
4. Press Soft1Edit) and screen will show “
IP
”, then press Soft1 (Del) to delete. Input your IP address and press Soft2 (Save)
to save what you input. After “
Saved
” shown, the screen will jump to show the
5. Press Soft1 (Del) to delete. Input your Net mask and press Soft2 (Save). After “
show the Gateway information
6. Press Soft1 (Del) to delete, Input your gateway and press
show the DNS information.
7. Press Soft1 (Del) to delete. Input your DNS server address and press Soft2 (Save). After “
return to show IP information.
8. Press Soft3 (Quit) once, the screen shows”
shows “ Saved ” and then shows the current net mode.
9. Press or Soft3 (Quit) thrice, return to main interface and at this time the phone is trying to change to Static
mode. Press button, the screen shows
just now, if the phone could display the right time, it shows that Static IP mode takes effect.
Setting DHCP mode
1. Press , then press twice,
“ WAN ”.
2. Press "OK" or Soft2 (Enter) to show “ Net Mode
jump to show the current net mode.
3. Press or Soft3 (Quit) thrice back to main interface and at this time phone is trying to change to DHCP mode.
Press until the phone shows “ DHCP
shows that DHCP mode takes effect.
3. SVP2000P’s basic operation
3.1. Answer calls
SVP2000P will ring to indicate you when there is call incoming
Answer with hook off
Take handset, you can talk directly. You can just hang up to finish talk
SVP2000PP Business
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
/Fax:+86 755 89352612 / Email: Support@stephen-tele.com / Url: www.stephen-tele.com
Soft3 (Quit) thrice return to standby, at this time the phone is trying to change to PPPoE mode. Press
for checking the status. If the screen shows “ Negotiating… ” it shows that the phone is trying to access to the
s, then the phone has already get IP with PPPoE.
Setting Static IP mode (static ADSL/Cable, or no PPPoE / DHCP network)
1. Prepare the network’s parameters first, such as IP Address, Net mask, Default Gateway and DNS server IP address. If you
this information, please contact the service provider or technician of network.
twice, chooses “ Network ”. Press "OK" or Soft2 (Enter), LCD screen will display “
3. Press "OK" or Soft2 (Enter), then choose “
Static
”.
”, then press Soft1 (Del) to delete. Input your IP address and press Soft2 (Save)
” shown, the screen will jump to show the
Net mask
information.
your Net mask and press Soft2 (Save). After “
Saved
” shown, the screen will jump to
delete, Input your gateway and press Soft2 (Save). After “
Saved
” shown, the screen will jump to
Del) to delete. Input your DNS server address and press Soft2 (Save). After “ Saved
the screen shows” Net Mode ”. the cursor stay at“ <>Static ”; with Soft2(Sa
” and then shows the current net mode.
or Soft3 (Quit) thrice, return to main interface and at this time the phone is trying to change to Static
button, the screen shows “ Static ” .the screen shows the IP address and gateway which were set
the right time, it shows that Static IP mode takes effect.
twice, chooses “ Network ”. Then press "OK" or Soft2 (Enter), the screen will
Net Mode ”. Select “ DHCP ”. Press Soft2 (Save), with “
Soft3 (Quit) thrice back to main interface and at this time phone is trying to change to DHCP mode.
DHCP ”,If the screen shows the IP address and gateway which were set just now, it
will ring to indicate you when there is call incoming,below is ways to answer call
：
Take handset, you can talk directly. You can just hang up to finish talk
。
Business POE IP Phone User Manual
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
tele.com
- 9 -
Soft3 (Quit) thrice return to standby, at this time the phone is trying to change to PPPoE mode. Press
” it shows that the phone is trying to access to the
1. Prepare the network’s parameters first, such as IP Address, Net mask, Default Gateway and DNS server IP address. If you
this information, please contact the service provider or technician of network.
”. Press "OK" or Soft2 (Enter), LCD screen will display “ WAN ”.
”, then press Soft1 (Del) to delete. Input your IP address and press Soft2 (Save)
information.
” shown, the screen will jump to
” shown, the screen will jump to
Saved ” shown, the screen will
”; with Soft2(Save) pressed,the screen
or Soft3 (Quit) thrice, return to main interface and at this time the phone is trying to change to Static
the IP address and gateway which were set
the right time, it shows that Static IP mode takes effect.
Enter), the screen will show
“ saved ” shown, screen will
Soft3 (Quit) thrice back to main interface and at this time phone is trying to change to DHCP mode.
If the screen shows the IP address and gateway which were set just now, it
：