background image

                                                                                                         

SVP2000PP Business POE IP Phone User Manual

 

STEPHEN TECHNOLOGIES CO.,LIMITED

/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115 

Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com

                                     

- 25 -   

 

SIP Config

 

Field name 

explanation 

 

Choose line to set info about SIP, there are 3 lines to choose. You can switch by 

Load

 

button.   

Register Status 

Shows if the phone has been registered the SIP server or not; or so, show Unapplied;

 

Server Name 

Set the server name. 

Server Address 

Input your SIP server address.

 

Server Port

 

Set your SIP server port.

 

Account Name

 

Input your SIP register account name.

 

Password

 

Input your SIP register password.

 

Phone Number 

Input the phone number assigned by your VoIP service provider. Phone will not register if 

there is no phone number configured. 

Display Name 

Set the display name. 

 

 

Proxy Server Address 

Set proxy server IP address

Usually, Register SIP Server configuration is the same as Proxy SIP 

Server. But if your VoIP service provider give different configurations between Register SIP 

Server and Proxy SIP Server, you need make different settings.) 

Proxy Server Port 

Set your Proxy SIP server port. 

Proxy Username 

Input your Proxy SIP server account. 

Proxy Password 

Input your Proxy SIP server password. 

 

Domain Realm 

Set the sip domain if needed, otherwise this VoIP phone will use the Register server address 

as sip domain automatically. (Usually it is same with registered server and proxy server IP 

address). 

Enable Register 

Start to register or not by selecting it or not.   

 

Register Expire Time 

Set expire time of SIP server register, default is 60 seconds. If the register time of the server 

requested is longer or shorter than the expire time set, the phone will change automatically 

the time into the time recommended by the server, and register again. 

NAT Keep Alive Interval 

Set examining interval of the server, default is 60 seconds 

User Agent 

Set the user agent if have, the default is VoIP Phone 1.0 

Signal Key 

Set the key for signal encryption 

Media Key 

Set the key for RTP encryption 

Local port 

Set sip port of each line 

Ring type 

Set ring type of each line 

Hot line Number 

Set hot line number of each line 

Conference Number 

Configure conference number in server conference. 

Transfer Expire Time 

For the phone supports the transfer of certain special features server, set interval time 

between sending “bye” and hanging up after the phone transfers a call.   

Enable subscribe 

Enable the option ,the phone will receive the notify from the server. 

Enable Keep 

Authentication 

Enable/Disable Keep Authentication System will take the last authentication field which is 

passed the authentication by server to the request packet. It will decrease the server’s 

repeat authorization work, if it is enable. 

 

NAT Keep Alive 

Enable/Disable keeps NAT of SIP alive.   

If some server refuse to register with too short interval time, and has no packets sending to 

device in private network to keep NAT alive, user could set this function ON. It need set the 

keep alive interval time less than the NAT server’s. 

Summary of Contents for SVP2000P




















































Reviews: