Cisco SVP2000P User Manual Download

Page: 5 / 51

SVP2000PP Business POE IP Phone User Manual

STEPHEN TECHNOLOGIES CO.,LIMITED

/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115

Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com

- 5 -

1. Introducing SVP2000P VoIP Phone

1.1. Thank you for your purchasing SVP2000P

Thank you for your purchasing SVP2000P, SVP2000P is a full-feature telephone that provides voice communication over the

same data network that your computer uses. This phone functions not only much like a traditional phone, allowing to place

and receive calls, and enjoy other features that traditional phone has, but also it own many data services features which

you could not expect from a traditional telephone.

This guide will help you easily use the various features and services available on your phone.

1.2. Delivery Content

Please check whether the delivery contains the following parts:

The base unit with display and keypad

The handset

The handset cable

The power supply

The Ethernet cable

The User Manual (you may download from our

website

)

IP Phone are designed to look like conventional phones, the following photo shows a broad overview of the IP Phone.

1.3. Keypad

Key

Key name

Function Description

Navigation

Navigation key assist users for operating...

In idle state they have special function

Left: Checking Incoming call

Up: Checking Missed Call

Right: Checking line status

Down: Checking IP info

OK: Enter into the phone's menu

Release key

Press RLS, the phone will skip to stand-by mode.

Note

: DO NOT Press RLS during the configuration process, or else phone will not

save the configuration modified and return to stand-by status.

Phone Book

Access to phone book, check the record list and add new records and revise the

record. When check the phone book record, press this key again will return to idle

mode.

Envelope

LED inside, if blinks remind user have new voicemail.

Hold

Temporarily hold the active call during the talking; press the key again might

release the call.

(Please refer to 3.5. - call hold for more details).

In idle mode,

press this key, LCD will show “Do Not Disturb”, and this phone is set to be No

disturbing mode. Press this key again to cancel this function.

Transfer

Use the key to realize blind transfer or attended transfer

please refers to 3.4.-call

transfer for

more details). In the idle mode, press this key, LCD will show”call

Summary of Contents for SVP2000P




















































Search results

Summary of Contents for SVP2000P

Reviews:

Related manuals for SVP2000P

Brands by name

Popular brands

Cisco SVP2000P, User Manual

Search results

Summary of Contents for SVP2000P

Reviews:

Related manuals for SVP2000P

Brands by name

Popular brands