Using the Cisco SPA 500S Attendant Console
Configuring the Cisco SPA 500S
Cisco Small Business Pro IP Phone SPA 525G User Guide
98
6
Configuring the Cisco SPA 500S
The Cisco SPA 500S can be configured to easily access other phone lines in the
system. For example, buttons on the Cisco SPA 500S can be configured to monitor
another extension, speed dial a number, transfer calls to another extension, and
more.
NOTE
The options available on the Cisco SPA 500S depend on the phone system
configuration. Your phone system might not provide all of the features mentioned in
this document.
Configuration of the Cisco SPA 500S and assignment of the line buttons is
performed by the system administrator and is not described in this document. To
configure the Cisco SPA 500S:
•
If the Cisco SPA 500S and attached Cisco SPA 525G are part of a Cisco
SPA 9000 Voice System, we recommend that you use the Cisco SPA 9000
Setup Wizard. For instructions on using the Setup Wizard, see the
System
Configuration Using the SPA 9000 Setup Wizard
document on Cisco.com.
See
Appendix A, “Where to Go From Here”
for the location of this
document.
•
If you want to manually configure the Cisco SPA 500S using the web user
interface for the Cisco SPA 525G to which the Cisco SPA 500S is attached,
see the
Cisco SPA 500 Series and Wireless IP Phone Administration Guide
on Cisco.com. See
Appendix A, “Where to Go From Here”
for the location of
this document.
•
If the Cisco SPA 500S and attached Cisco SPA 525G are used with a
Broadsoft or Asterisk server, see the
Cisco SPA 500 Series and Wireless IP
Phone Administration Guide
on Cisco.com. See
Appendix A, “Where to Go
From Here”
for the location of this document.