![background image](http://html.mh-extra.com/html/cisco/small-business-pro-series/small-business-pro-series_administration-manual_64988042.webp)
Setting up the Interfaces of the Gateway
Setting up the Wireless LAN
42
SRP 521 VoIP Gateway Administration Guide
3
RTS Threshold
The RTS threshold value. The default value is 2346.
Advanced Wireless for group SSID
AP Isolation
This option isolates all wireless clients and wireless
devices on your network from each other. Wireless
devices can communicate with the gateway but not with
each other. To use this function, select Enabled. AP
Isolation is disabled by default.
Authentication Type
The default is set to Auto, which allows either Open
System or Shared Key authentication to be used. With
Open System authentication, the sender and the
recipient do NOT use a WEP key for authentication. With
Shared Key authentication, the sender and recipient use
a WEP key for authentication. Select Shared Key to only
use Shared Key authentication.
Basic Rate
The Basic Rate setting is not actually one rate of
transmission but a series of rates at which the gateway
can transmit. The gateway advertises its Basic Rate to
the other wireless devices in your network, so they
know which rates will be used. The gateway will also
advertise that it will automatically select the best rate for
transmission. The default setting is Default, when the
gateway can transmit at all standard wireless rates (1-2
Mbps, 5.5 Mbps, 11 Mbps, 18 Mbps, and 24 Mbps).
Other options are 1-2 Mbps, for use with older wireless
technology, and All, when the gateway can transmit at all
wireless rates. The Basic Rate is not the actual rate of
data transmission. If you want to specify the gateway's
rate of data transmission, configure the Transmission
Rate setting.
Transmission Rate
The rate of data transmission should be set depending
on the speed of your wireless network. You can select
from a range of transmission speeds, or you can select
Auto to have the gateway automatically use the fastest
possible data rate and enable the Auto-Fallback feature.
Auto-Fallback will negotiate the best possible
connection speed between the gateway and a wireless
client. The default is Auto.
Field
Description