background image

Setting up the Interfaces of the Gateway

Setting up the LAN Interface

22

SRP 521 VoIP Gateway Administration Guide

3

Setting up the LAN Interface

DHCP Server Pool Setting

DHCP Server Pool settings are configured on this page. After clicking Add Rule 
button, you can create another DHCP Server Pool.

STEP 1

Click Interface Setup on the tab and then click LAN in the navigation pane. The 
DHCP Server Pool Setting page appears.

STEP  2

You can edit or delete a DHCP entry by clicking the edit or delete icon.

STEP  3

Click Add Rule to open the DHCP Add page. From this page you can add a DHCP 
entry.

STEP  4

Click Submit to save your settings.

Failover Validation 
Site

A ping target for the gateway to use to detect the status 
of the Internet connection. By default the gateway pings 
the Network Time Protocol (NTP) servers. You may 
specify a different IP address as a target here.

WAN Interfaces

This area provides information on current status of the 
Ethernet Internet connection and Mobile Network 
connection. You can click the Status hyperlink to view 
the details. You may also configure the interface priority 
by clicking Up or Down. Note that the interface priority 
setting is configurable only when Ethernet Connection 
Recovery is disabled.

Field

Description

Summary of Contents for Small Business Pro series




























































































































Reviews: