background image

Setting up the Interfaces of the Gateway

Setting up the Wireless LAN

38

SRP 521 VoIP Gateway Administration Guide

3

Wireless MAC Filter

You can control access to your wireless network by specifying the MAC 
addresses of the wireless devices that are permitted access or are blocked.

STEP 1

Click Interface Setup on the tab and then click WiFi Setting in the navigation pane. 
Click Wireless MAC Filter. The Wireless MAC Filter page appears.

STEP  2

From the Select a SSID menu, choose the MAC filter settings to apply to the SSID.

STEP  3

To filter wireless users by MAC Address, either permitting or blocking access, 
select Enabled. If you do not wish to filter users by MAC Address, use the default 
setting, Disabled.

STEP  4

In the Access Restriction area, select either Prevent or Permit.

RADIUS Port

The port number of the RADIUS server. The default 
value is 1812.

Shared Secret

The key shared between the gateway and the server.

Secondary RADIUS Server

RADIUS Server 
Address

The IP Address of the RADIUS server. 

RADIUS Port

The port number of the RADIUS server.

Shared Secret

The key shared between the gateway and the server.

Key Renewal 
Timeout

Enter a Key Renewal period, which instructs the 
gateway how often it should change the encryption 
keys. The default Key Renewal period is 3600 seconds.

RADIUS

This option features WEP used in coordination with a 
RADIUS server. If you have two RADIUS servers, you 
can select one to be the primary server, and the 
secondary server can be a backup server. (This option 
should only be used when a RADIUS server is 
connected to the gateway.)

TX Key

Select which TX (Transmit) Key to use. The default is 1.

Field

Description

Summary of Contents for Small Business Pro series




























































































































Reviews: