Security
Configuring
Cisco Small Business 300 Series Managed Switch Administration Guide
308
17
Defaults
The following defaults are relevant to this feature:
•
No default server is defined by default.
•
If you configure a server, the accounting feature is disabled by
default.
Interactions With Other Features
You cannot enable accounting on both a RADIUS and server.
Workflow
To use a server, do the following:
STEP 1
Open an account for a user on the server.
STEP 2
Configure that server along with the other parameters in the and Add
Server pages.
STEP 3
Select
in the Management Access Authentication page, so that when a
user logs onto the device, authentication is performed on the server
instead of in the local database.
NOTE
If more than one server has been configured, the device uses the
configured priorities of the available servers to select the
server to be used by the device.
Configuring a Server
The page enables configuring servers.
Only users who have privilege level 15 on the server can administer the
device. Privilege level 15 is given to a user or group of users on the
server by the following string in the user or group definition:
service = exec {
priv-lvl = 15
}
To configure server parameters:
