Cisco Small Business 300 Administration Manual Download Page 214

Page: 214 / 483

VLAN Management

VLAN Groups

197

Cisco Small Business 300 Series Managed Switch Administration Guide

NOTE

This MAC address cannot be assigned to any other VLAN group.

•

Prefix Mask

—Enter one of the following:

Host

—Source host of the MAC address

Length

—

Prefix

of the MAC address

•

Group ID

—Enter a user-created VLAN group ID number.

STEP 4

Click

Apply

. The MAC address is assigned to a VLAN group.

Mapping VLAN Group to VLAN Per Interface

Ports/LAGs must be in General mode.

To assign a MAC-based VLAN group to a VLAN on an interface:

STEP 1

Click

VLAN Management

VLAN Groups

MAC-Based Groups to VLAN.

STEP 2

Click

Add.

STEP 3

Enter the values for the following fields:

•

Group Type

—Displays that the group is MAC-Based.

•

Interface

—Enter a general interface (port/LAG) through which traffic is

received.

•

Group ID

—Select a VLAN group, defined in the MAC-Based Groups page

•

VLAN ID

—Select the VLAN to which traffic from the VLAN group is

forwarded.

STEP 4

Click

Apply

to set the mapping of the VLAN group to the VLAN. This mapping

does not bind the interface dynamically to the VLAN; the interface must be
manually added to the VLAN.)

Summary of Contents for Small Business 300




































































































































































































































































































































































































































































































Search results

Summary of Contents for Small Business 300

Reviews:

Related manuals for Small Business 300

Brands by name

Popular brands

Cisco Small Business 300, Administration Manual

Search results

Summary of Contents for Small Business 300

Reviews:

Related manuals for Small Business 300

Brands by name

Popular brands