Cisco SCE 8000 10GBE, Software Configuration Manual

Page: 128 / 478

5-26
Cisco SCE 8000 10GBE Software Configuration Guide
OL-30621-02
Chapter 5 Configuring the Management Interface and Security
Authentication, Authorization, and Accounting
How to Add a User with a Privilege Level and an MD5 Encrypted Password Entered as an MD5 Encrypted String
From the SCE(config)# prompt, type:
Deleting a User
Options
The following options are available:
• name— Name of the user to be deleted
From the SCE(config)# prompt, type:
Configuring AAA Login Authentication
There are two features to be configured for login authentication:
• Maximum number of permitted Telnet login attempts
•
The authentication methods used at login (see “General AAA Fallback and Recovery Mechanism”
section on page 5-17 .)
The procedures for configuring login authentication are explained in the following sections:
•
Configuring Maximum Login Attempts, page 5-26
•
Configuring the AAA Login Authentication Methods, page 5-27
Configuring Maximum Login Attempts
Use this command to set the maximum number of login attempts that will be permitted before the session
is terminated.
Options
The following options are available:
•
number-of-attempts— The maximum number of login attempts that will be permitted before the
telnet session is terminated.
This is relevant only for Telnet sessions. From the local console, the number of re-tries is unlimited.
–
Default = three
Command Purpose
username name privilege level secret 5
encrypted-secret
Adds a user with a privilege level and an MD5
encrypted password entered as an MD5 encrypted
string.
Command Purpose
no username name Deletes a user.