5-27
Cisco SCE 8000 10GBE Software Configuration Guide
OL-30621-02
Chapter 5 Configuring the Management Interface and Security
Authentication, Authorization, and Accounting
From the SCE(config)# prompt, type:
Configuring the AAA Login Authentication Methods
You can configure "backup" login authentication methods to be used if failure of the primary login
authentication method (see
“General AAA Fallback and Recovery Mechanism” section on page 5-17
).
Use this command to specify which login authentication methods are to be used, and in what order of
preference.
•
How to Specify the Login Authentication Methods, page 5-27
•
How to Delete the Login Authentication Methods List, page 5-27
Options
The following options are available:
•
method—
The login authentication methods to be used. You may specify up to four different
methods, in the order in which they are to be used.
–
group —
Use authentication.
–
local—
Use the local username database for authentication
–
enable
(default)—Use the "
enable
" password for authentication
–
none—
Use no authentication.
How to Specify the Login Authentication Methods
From the SCE(config)# prompt, type:
How to Delete the Login Authentication Methods List
From the SCE(config)# prompt, type:
Command
Purpose
aaa authentication attempts login
number-of-attempts
Configures maximum login attempts.
Command
Purpose
aaa authentication login default
method1
[method2...]
Specifies login authentication methods.
You may list a maximum of four methods; all four
methods explained above. List them in the order
of priority.
Command
Purpose
no aaa authentication login default
Deletes login authentication methods list.
If the login authentication methods list is deleted,
the default login authentication method only
(enable password) will be used.
authentication will not be used.
