14-25
Cisco SCE 8000 10GBE Software Configuration Guide
OL-30621-02
Chapter 14 Value-Added Services (VAS) Traffic Forwarding
Configuring VAS Traffic Forwarding
Options
The following options are available:
•
number
—The number of the VAS server.
•
vlan-id
—The VLAN tag to use for the specified VAS server
The VLAN tag can be redefined as necessary.
–
Default—No VLAN.
Note the following important points:
•
The VAS server is not operational until the VLAN tag is defined.
•
Disabling the server does not remove the VLAN tag number configured to the server.
•
The
no
form of the command (same as the
default
form of the command), removes the previously
configured VLAN tag (no VLAN is the default configuration).
How to Configure the VLAN Tag Number for a Specified VAS Server
From the SCE(config if)# prompt, type:
How to Remove the VLAN Tag Number from a Specified VAS Server
From the SCE(config if)# prompt, type:
Configuring the Health Check
This section explains how to to enable and disable the Health Check, and how to define the ports it should
use.
By default, the VAS server health check is enabled, however you may disable it.
Command
Purpose
VAS-traffic-forwarding VAS server-id
number
VLAN
vlan-id
Configures the VLAN tag number for a specified
VAS server.
Commands
Purpose
no VAS-traffic-forwarding VAS server-id
number
VLAN
Removes the VLAN tag number from a specified
VAS server.
default VAS-traffic-forwarding VAS server-id
number
VLAN
You can also use the default form of the command
to remove the VLAN tag configuration.