14-32
Cisco SCE 8000 10GBE Software Configuration Guide
OL-30621-02
Chapter 14 Value-Added Services (VAS) Traffic Forwarding
Monitoring VAS Traffic Forwarding
Monitoring VAS Traffic Forwarding
Use the commands in this section to display the following information for VAS configuration and
operational status summary.
•
Global VAS status summary—VAS mode, the traffic link used
•
VAS Server Groups information summary—operational status, number of configured servers,
number of current active servers.
This information may be displayed for a specific server group or all server groups
•
VAS servers information summary—operational status, Health Check operational status, number of
subscribers attached to this server.
This information may be displayed for a specific server or all servers
•
VAS health check counters
The following sample outputs are included.
•
How to Display Global VAS Status and Configuration, page 14-32
•
How to Display Operational and Configuration Information for a Specific VAS Server Group,
page 14-33
•
How to Display Operational and Configuration Information for All VAS Server Groups, page 14-33
•
How to Display Operational and Configuration Information for a Specific VAS Server, page 14-33
•
How to Display Operational and Configuration Information for All VAS Servers, page 14-34
•
How to Display the VAS Servers Used by a Specified Subscriber, page 14-34
•
How to Display Health Check Counters for All VAS Servers, page 14-35
•
How to Clear the Health Check Counters for a Specified VAS Server, page 14-35
•
How to Clear the Health Check Counters for All VAS Servers, page 14-35
How to Display Global VAS Status and Configuration
From the SCE> prompt, type:
Example
SCE>show interface linecard 0 VAS-traffic-forwarding
VAS traffic forwarding is enabled
VAS traffic link configured: Link-1 actual: Link-1
Command
Purpose
show interface linecard 0
VAS-traffic-forwarding
Displays the global VAS status and configuration.