12-7
Cisco SCE 8000 10GBE Software Configuration Guide
OL-30621-02
Chapter 12 Identifying and Preventing Distributed Denial-of-Service Attacks
Attack Filtering and Attack Detection
Hardware attack filtering is an automatic process and is not user-configurable. However, due to the
effects of hardware attack filtering on attack reporting, it is important to be aware of when hardware
processing has been activated, and so monitoring of hardware filtering is essential. There are two ways
to do this (see
“Monitoring Attack Filtering” section on page 12-24
•
Check the "
HW-filter
" field in the
show interface linecard attack-filter current-attacks
command.
•
Check the "
HW-filter
" field in the attack log file.
