![background image](http://html.mh-extra.com/html/cisco/rf-gateway-10/rf-gateway-10_release-notes_64978016.webp)
16
Release Notes for Cisco RF Gateway 10 in Cisco IOS Release 12.2SQ
OL-18677-10
New and Changed Information
Video Control Plane with Generic QAM Interface (GQI)
The Generic QAM Interface (GQI) based video control plane provides video session management
through a GQI signaling protocol with Digital Network Control System (DNCS) and Universal
Session/Resource Manager (USRM).
The GQI supports the following:
•
Session management: session creation, deletion, and queries
•
SDV shell session management: shell session creation, deletion, binding, and unbinding
•
Packet management: packet insertion, cancellation, and queries
•
Edge device maintenance: reset control.
For more information, see
Video
.
1:1 and 1:N DS-48 Line Card Redundancy for Video and DEPI
The line card redundancy (LCRED) feature introduced in Cisco IOS Release 12.2(44)SQ supports DEPI
D-MPT traffic under the DEPI Manual mode. In Cisco IOS Release 12.2(55)SQ, line card redundancy
supports Video and DEPI D-MPT with DEPI Control Plane in the DEPI Protocol mode. In case of line
card failure, OIR, or a forced line card switchover, the standby line card becomes active and continues
to process Video or DEPI traffic.
For more information, see the
1:1 and 1:N DS-48 Line Card Redundancy
.
New Software Features in Cisco IOS Release 12.2(44)SQ2
This section describes the new and modified software features supported in Cisco IOS Release
12.2(44)SQ2.
Bundled Image upgrade enhancements
The Supervisor image is bundled with upgrades for all device images. The Supervisor card automatically
checks the versions of the software and firmware on all line cards during system boot up and upgrades
as necessary.
For more information, see
Bundled Image Upgrade
.
New Software Features in Cisco IOS Release 12.2(44)SQ1
There are no new software features supported in Cisco IOS Release 12.2(44)SQ1.
New Software Features in Cisco IOS Release 12.2(44)SQ
Below are the software features supported on the Cisco RFGW-10 for Cisco IOS Release 12.2(44)SQ.