7
Release Notes for Cisco RF Gateway 10 in Cisco IOS Release 12.2SQ
OL-18677-10
New and Changed Information
New Hardware Features in Cisco IOS Release 12.2(44)SQ1
Table 3
lists the Cisco IOS Release 12.2(44)SQ1 support for a minor board revision of the
Cisco RFGW-10 DS-48 line card.
Note
Cisco IOS Release 12.2(44)SQ1 is backward compatible with the existing, released RFGW-10 DS-48
UEQAM line cards (DS48 Board = 800-28096-01) and field-replaceable units (FRUs).
New Hardware Features in Cisco IOS Release 12.2(44)SQ
Cisco IOS Release 12.2(44)SQ coincides with the introduction of the Cisco Radio Frequency (RF)
Gateway 10 system. All released field-replaceable units (FRUs) are supported only by Cisco IOS
Release 12.2(44)SQ and the Cisco RFGW-10 platform.
Below is a high level summary of the supported hardware features of the Cisco RFGW-10.
Cisco RF Gateway 10 Universal Edge QAM Chassis
•
13 rack unit carrier-class chassis
–
19-inch rack-mount capability
–
4536-watt capacity
–
Front-to-rear airflow design
–
Integrated RF switching
–
Cable-once (wire-once) coaxial connections
–
LCD front panel display
–
240-Gbps system performance
–
System-level redundancy
•
Redundancy system architecture
–
All major FRUs redundant (Supervisor card, line card, PEM)
–
Dual-zone integrated RF data path switch
–
500-ms line card failover
–
Full software and hardware high availability support
–
External Gigabit Ethernet / 10-Gigabit Ethernet redundancy
–
DTI redundancy
–
System operation from single power supply
Table 3
Cisco RFGW-10 DS-48 line card Board and Upconverter
Cisco IOS Release
RFGW-10 DS-48 UEQAM Card
Internal DS48 Upconverter
Cisco IOS Release 12.2(44)SQ
DS48 Board = 800-28096-01
DS48 Upconverter = 800-29408-01
Cisco IOS Release 12.2(44)SQ1 DS48 Board = 800-28096-02
DS48 Upconverter = 800-29408-02
