November 28, 2012 | Cisco Systems | PrecisionHD 4X Camera Connectivity Problems
10
3.
Open up a command prompt (Start
Run cmd).
4.
Change directory to C:\serial_shell (cd C:\serial_shell).
5.
To run the program, type trfs_mini_shell.exe
is the number of your COM port
(screenshot below).
6.
Alternatively, you can open the terminal emulation program by going to Start
Run and typing in
c:\serial_shell\trfs_mini_shell.exe -
Verify Failed Camera Boot Failed Initialization
Once all cables are connected, software is installed, and the connection to the COM port is established using the
terminal emulator, apply power to the camera by either a) plugging in the C20 power cable; b) using a 12V/2A
power supply with appropriate barrel connector, or c) use the Cisco power cable for the 4X cameras if available
