![Cisco PA-POS-2OC3 Installation And Configuration Manual Download Page 83](http://html.mh-extra.com/html/cisco/pa-pos-2oc3/pa-pos-2oc3_installation-and-configuration-manual_63538083.webp)
4-15
PA-POS-2OC3 Two-Port Packet-over-SONET Port Adapter Installation and Configuration
OL-3028-06
Chapter 4 Configuring the PA-POS-2OC3
Checking the Configuration
Cisco 7600 Routers with FlexWAN and Enhanced FlexWAN—Example Output of the show version Command
Following is an example of the
show version
command from a Cisco 7600 router with the
Cisco PA-POS-2OC3 port adapter installed in a FlexWAN module:
Router#
show version
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-PK9SV-M), Version 12.2(17d)SXB1, RELEASE SOFTWARE
(fc2)
Technical Support:
http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 28-May-04 19:13 by ccai
Image text-base: 0x40020FBC, data-base: 0x41F38000
ROM: System Bootstrap, Version 12.2(14r)S1, RELEASE SOFTWARE (fc1)
BOOTLDR: s72033_rp Software (s72033_rp-PK9SV-M), Version 12.2(17d)SXB1, RELEASE SOFTWARE
(fc2)
pe2 uptime is 2 weeks, 6 days, 18 hours, 44 minutes
Time since pe2 switched to active is 2 weeks, 6 days, 18 hours, 43 minutes
System returned to ROM by power-on (SP by power-on)
System image file is "sup-bootflash:s72033-pk9sv-mz.122-17d.SXB1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco CISCO7609 (R7000) processor (revision 1.0) with 458752K/65536K bytes of memory.
Processor board ID FOX071000FH
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
2 FlexWAN controllers (3 POS).
1 GIGA-WAN controller (4 GIGAWAN Ports).
1 4-port OC12 POS controller (4 POS).
1 1-port OC48 POS controller (1 POS).
1 Dual-port OC12c ATM controller (2 ATM).
10 Virtual Ethernet/IEEE 802.3 interface(s)
36 Gigabit Ethernet/IEEE 802.3 interface(s)
2 ATM network interface(s)
8 Packet over SONET network interface(s)
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102