iv
PA-POS-2OC3 Two-Port Packet-over SONET Port Adapter Installation and Configuration
OL-3028-06
Preface
Objectives
Objectives
This document describes how to install and configure the PA-POS-2OC-3 two-port Packet-over-SONET
(POS) port adapter, hereafter referred to as the PA-POS-2OC3, which is used in the following platforms:
•
Cisco 7200 VXR routers, which consist of the four-slot Cisco 7204VXR router and the six-slot
Cisco 7206VXR router
•
Cisco 7201 router
•
Cisco 7301 router
•
Cisco 7304 PCI port adapter carrier card in the Cisco 7304 router
•
Cisco 7401ASR router
•
Cisco 7500 series routers, which consist of the five-slot Cisco 7505, the seven-slot Cisco 7507, and
the thirteen-slot Cisco 7513 routers.
•
Cisco 7600 series routers, which consist of the three-slot Cisco 7603, the six-slot Cisco 7606, the
nine-slot Cisco 7609, and the thirteen-slot Cisco 7613 routers, using FlexWAN and Enhanced
FlexWAN modules.
Note
The Cisco 7206 VXR router can be used as a router shelf in a Cisco AS5800 universal access server. For
more information about the Cisco 7206 VXR as a router shelf, see the Cisco AS5800 Universal Access
Server documentation listed in the
“Related Documentation” section on page iv
.
Organization
This document contains the following chapters:
:
Related Documentation
Your router or switch and the Cisco IOS software running on it contain extensive features and
functionality, which are documented in the following resources:
•
Cisco IOS software:
Section
Title
Description
Chapter 1
Describes the PA-POS-2OC3 and its LEDs and cables.
Provides supporting information about addressing,
networks, and SONET.
Chapter 2
Describes safety considerations, tools required, and
procedures you should perform
before
the actual
installation.
Chapter 3
Removing and Installing
Port Adapters
Provides instructions for installing a port adapter in the
supported platforms and for connecting cables.
Chapter 4
Provides instructions for configuring your port adapter
on the supported platforms.
