Cisco ONS 15600, Reference Manual

Page: 79 / 376

2-27
Cisco ONS 15600 SDH Reference Manual, Release 9.0
78-18400-01
Chapter 2 Card Reference
2.10 SFP/XFP Modules
Caution
Use only SFPs certified for use in Cisco Optical Networking Systems. The qualified Cisco SFP
pluggable module’s top assembly numbers (TANs) are provided in
Table 2-21 .
To determine the line rates supported by each SFP/XFP, see the “A.3 SFP/XFP Specifications” section
on page A-12 .
SFPs are integrated fiber optic transceivers that provide high-speed serial links from a port or slot to the
network. Various latching mechanisms can be used on the SFP/XFP modules. There is no correlation
between the type of latch and the model type (such as SX or LX/LH) or technology type (such as Gigabit
Ethernet). See the label on the SFP/XFP for technology type and model. One type of latch available is a
Mylar tab as shown in
Figure 2-13 , a second type of latch available is an actuator/button ( Figure 2-14 ),
and a third type of latch is a bail clasp ( Figure 2-15 ).
SFP dimensions are:
• Height 0.03 in. (8.5 mm)
•
Width 0.53 in. (13.4 mm)
• Depth 2.22 in. (56.5 mm)
SFP temperature ranges for are:
• COM—Commercial operating temperature range: 23 to 158 degrees Fahrenheit (–5 to 70 degrees
Celsius)
•
EXT—Extended operating temperature range: 23 to185 degrees Fahrenheit (–5 to 85 degrees
Celsius)
• IND—Industrial operating temperature range: –40 to 185 degrees Fahrenheit (–40 to 85 degrees
Celsius)
Table 2-21 SFP Compatibility
Card
Compatible SFP
(Cisco Product ID) Cisco Top Assembly Number (TAN)
ASAP 4PIO only
(ONS 15600 SONET/SDH)
ONS-SE-2G-L2
ONS-SE-Z1
ONS-SI-622-L2
ONS-SI-155-L2
ONS-SC-2G-30.3= through
ONS-SC-2G-60.6=
ONS-SI-2G-S1
ONS-SI-2G-L2
ONS-SI-2G-I1
10-2013-01
10-1971-02
10-1936-02
10-1937-02
10-2155-02 through
10-2186-02
10-1992-02
10-1990-02
10-1993-02