C-28
Cisco ONS 15600 SDH Reference Manual, Release 9.0
78-18400-01
Appendix C Network Element Defaults
C.3 Node Default Settings
•
MS-SPRing protection settings—Set whether MS-SPRing-protected circuits are revertive, and what
the reversion time is, at both the ring and span levels.
•
Legal Disclaimer—Set the legal disclaimer that warns users at the login screen about the possible
legal or contractual ramifications of accessing equipment, systems, or networks without
authorization.
•
Power Monitor—Set the power monitoring settings for the node.
•
Security Grant Permissions—Set default user security levels for activating/reverting software, PM
data clearing, database restoring, and retrieving audit logs.
•
Security Access settings—Set default security settings for LAN access, shell access, serial craft
access, element management system (EMS) access (including Internet Inter-Object Request Broker
Protocol [IIOP] listener port number), TL1 access, and Simple Network Management Protocol
(SNMP) access.
•
Security RADIUS settings—Set default RADIUS server settings for the accounting port number and
the authentication port number, and whether to enable the node as a final authenticator.
•
Security Policy settings—Set the allowable failed logins before lockout, idle user timeout for each
user level, optional lockout duration or manual unlock enabled, password reuse and change
frequency policies, number of characters difference that is required between the old and new
password, password aging by security level, enforced single concurrent session per user, and option
to disable inactive user after a set inactivity period.
•
Security Password settings—Set when passwords can be changed, how many characters they must
differ by, whether or not password reuse is allowed, and whether a password change is required on
first login to a new account; set password aging enforcement and user-level specific aging and
warning periods; set how many consecutive identical characters are allowed in a password,
maximum password length, minimum password length, minimum number and combination of
nonalphabetical characters required, and whether or not to allow a password that is a reversal of the
login ID associated with the password.
•
BITS Timing settings—Set the coding, framing, state, Admin synchronization status messaging
(SSM), AISThreshold, CableType, FacilityType, line build out, and Sa bit settings for building
integrated timing supply 1 (BITS-1) and BITS2 timing.
•
General Timing settings—Set the mode (External, Line, or Mixed), quality of reserved (RES) timing
(the rule that defines the order of clock quality from lowest to highest), revertive, reversion time,
and SSM message set for node timing.
Note
Any node level defaults changed using the
Provisioning > Defaults
tab, changes existing node level
provisioning. Although this is service affecting, it depends on the type of defaults changed, for example,
general, and all timing and security attributes. The “Changing default values for some node level
attributes overrides the current provisioning.” message is displayed. The Side Effects column of the
Defaults editor (right-click a column header and select
Show Column > Side Effects
) explains the effect
of changing the default values. However, when the card level defaults are changed using the
Provisioning > Defaults
tab, existing card provisioning remains unaffected.
Note
For more information about each individual node setting, refer to the “Change Node Settings” chapter
of the
Cisco ONS 15600 SDH Procedure Guide
.
