Cisco ONS 15600, Reference Manual

Page: 16 / 376

Figures
xvi
Cisco ONS 15600 SDH Reference Manual, Release 9.0
78-18400-01
Figure 2-16 Bail Clasp XFP (Unlatched)
2-29
Figure 2-17 Bail Clasp XFP (Latched)
2-29
Figure 3-1 ONS 15600 SDH in a 1+1 Protected Configuration
3-2
Figure 3-2 ONS 15600 SDH in an Unprotected Configuration
3-3
Figure 4-1 CTC Window Elements in the Node View (Default Login View)
4-7
Figure 4-2 Terminal Loopback Indicator
4-9
Figure 4-3 Facility Loopback Indicator
4-9
Figure 4-4 Network Displayed in CTC Network View
4-11
Figure 4-5 CTC Card View Showing an STM-64 Card
4-14
Figure 4-6 Static IP-Over-CLNS Tunnels
4-16
Figure 4-7 TL1 Tunnels
4-17
Figure 6-1 ONS 15600 SDH Timing Example
6-3
Figure 7-1 ONS 15600 SDH Circuit Window in Network View
7-3
Figure 7-2 Detailed Circuit Map Showing a Terminal Loopback
7-10
Figure 7-3 Editing SNCP Selectors
7-13
Figure 7-4 Viewing SNCP Switch Counts
7-14
Figure 7-5 Secondary Sources and Drops
7-17
Figure 7-6 Rolls Window
7-20
Figure 7-7 Single Source Roll
7-22
Figure 7-8 Single Destination Roll
7-22
Figure 7-9 Single Roll from One Circuit to Another Circuit (Destination Changes)
7-22
Figure 7-10 Single Roll from One Circuit to Another Circuit (Source Changes)
7-22
Figure 7-11 Dual Roll to Reroute a Link
7-23
Figure 7-12 Dual Roll to Reroute to a Different Node
7-23
Figure 7-13 ONS 15600 SDH as Hub Node between Protection Domains
7-27
Figure 7-14 Low-order Traffic Routing over an ONS 15600 SDH Hub Node
7-28
Figure 8-1 Point-to-Point ADM Configuration
8-2
Figure 8-2 Four-Node, Two-Fiber MS-SPRing
8-3
Figure 8-3 Four-Node, Two-Fiber MS-SPRing Traffic Pattern Sample
8-4
Figure 8-4 Four-Node, Two-Fiber MS-SPRing Traffic Pattern Following Line Break
8-5
Figure 8-5 MS-SPRing Bandwidth Reuse
8-6
Figure 8-6 Connecting Fiber to a Four-Node, Two-Fiber MS-SPRing
8-7
Figure 8-7 Basic Four-Node SNCP
8-8
Figure 8-8 SNCP with a Fiber Break
8-9
Figure 8-9 ONS 15600 SDH Traditional MS-SPRing Dual-Ring Interconnect (Same-Side Routing)
8-11