SUMMARY STEPS
1.
clear hardware rate-limiter
{
all
|
access-list-log
|
bfd
|
exception
|
fex
|
layer-3 glean
|
layer-3 multicast
local-groups
|
span-egress
[
module module
] }
DETAILED STEPS
Purpose
Command or Action
Clears the rate limit statistics.
clear hardware rate-limiter
{
all
|
access-list-log
|
bfd
|
exception
|
fex
|
layer-3 glean
|
layer-3 multicast
local-groups
|
span-egress
[
module module
] }
Step 1
Example:
switch# clear hardware rate-limiter access-list-log
Verifying the Rate Limit Configuration
To display the rate limit configuration information, perform the following tasks:
Purpose
Command
Displays the rate limit
configuration.
show hardware rate-limiter
[
access-list-log
|
bfd
|
exception
|
fex
|
layer-3 glean
|
layer-3 multicast local-groups
|
span-egress
|
module
module
]
Configuration Examples for Rate Limits
The following example shows how to configure rate limits for packets copied to the supervisor module for
access list logging:
switch(config)#
hardware rate-limiter access-list-log
switch(config)#
show hardware rate-limiter access-list-log
Units for Config: packets per second
Allowed, Dropped & Total: aggregated since last clear counters
Module: 4
R-L Class
Config
Allowed
Dropped
Total
+------------------+--------+---------------+---------------+-----------------
+
access-list-log
100
0
0
0
Port group with configuration same as default configuration
Eth4/1-36
Module: 22
R-L Class
Config
Allowed
Dropped
Total
+------------------+--------+---------------+---------------+-----------------
+
access-list-log
100
0
0
0
Port group with configuration same as default configuration
Eth22/1-0
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
498
Configuring Rate Limits
Verifying the Rate Limit Configuration
