Cisco Nexus 9000 Series, Configuration Manual

Page: 120 / 562

2. terminal no verify-only [ username username ]
DETAILED STEPS
Purpose Command or Action
Enables command authorization verification. After you
enter this command, the Cisco NX-OS software indicates
whether the commands you enter are authorized or not. terminal verify-only [ username username ]
Example:
switch# terminal verify-only
Step 1
Disables command authorization verification. terminal no verify-only [ username username ]
Example:
Step 2
switch# terminal no verify-only
Configuring Privilege Level Support for Authorization on Servers
You can configure privilege level support for authorization on servers.
Unlike Cisco IOS devices, which use privilege levels to determine authorization, Cisco NX-OS devices use
role-based access control (RBAC). To enable both types of devices to be administered by the same
servers, you can map the privilege levels configured on servers to user roles configured on Cisco
NX-OS devices.
When a user authenticates with a server, the privilege level is obtained and used to form a local
user role name of the format “priv-
n ,” where n is the privilege level. The user assumes the permissions of this
local role. Sixteen privilege levels, which map directly to corresponding user roles, are available. The following
table shows the user role permissions that correspond to each privilege level.
User Role Permissions Privilege Level
network-admin permissions 15
• Standalone role permissions, if the feature
privilege command is disabled.
• Same permissions as privilege level 0 with
cumulative privileges for roles, if the feature
privilege
command is enabled.
13 - 1
Permission to execute show commands and exec
commands (such as ping , trace , and ssh ).
0
When the feature privilege command is enabled, privilege roles inherit the permissions of lower level privilege
roles.
Note
You must also configure the privilege level for the Cisco NX-OS device on the Cisco Secure Access Control
Server (ACS). Note
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
94
Configuring
Configuring Privilege Level Support for Authorization on Servers