51
Catalyst 6000 Family Network Analysis Module Installation and Configuration Note
78-10406-05
Administering the NAM
Network Analysis Module (WS-X6380-NAM) Console, 2.1(1a)m
Copyright (C) 1999, 2000, 2001 Cisco Systems, Inc.
WARNING! Default password has not been changed!
[email protected]# upgrade
ftp://[email protected]/tftpboot/c6nam.1-2-1.bin.gz
Password for [email protected]:
500 'SIZE c6nam.1-1-0-20.gz': command not understood.
ftp://[email protected]/tftpboot/c6nam.1-2-1.bin.gz (unknown size)
- [-] 39103K
40041798 bytes transferred in 48.16 sec (811.93k/sec)
Upgrade file ftp://[email protected]/tftpboot/c6nam.1-2-1.bin.gz
is downloaded. Upgrading will wipe out the
contents of the application partition on the hard disk.
Do you want to proceed installing it [Y/N]:
y
Proceeding with installation. Please do not interrupt.
If installation is interrupted or fails, boot the maintenance
partition again and restart upgrade.
/usr/local/nam/bin/netinstall /dev/hda1 -inf=/tmp/upgrade.bin
Upgrade complete. You can boot the new application partition.
exit
Console> (enable)
reset 3
Module 3 shut down in progress, please don't remove module until shutdown completed.
2000 May 25 09:30:59 %SYS-5-MOD_RESET:Module 3 reset from Software
2000 May 25 09:32:56 %SYS-5-MOD_OK:Module 3 is online
Console> (enable)
Upgrading the NAM Maintenance Software
To upgrade the NAM maintenance software, follow these steps:
Step 1
Copy the NAM maintenance software image to a directory that is accessible to FTP.
Step 2
Log into the switch through the console port or through a Telnet session.
Step 3
To upgrade the maintenance software, the NAM must be running in the application image. If the NAM
is already running in the application image, go to
Step 4
. Otherwise, enter this command in privileged
mode:
Console> (enable)
reset
mod
hdd:1
Step 4
After the NAM is back online, establish a console session with the NAM and log into the root account.
Step 5
Upgrade the NAM maintenance software by entering this command:
root@localhost#
upgrade
ftp-url
ftp-url
is the FTP location and the name of the NAM software image file.
Note
If the FTP server does not allow anonymous users, use the following syntax for the
ftp-url
value: ftp://user@host/absolute-path/filename. Enter your password when prompted.
Step 6
Follow the screen prompts during the upgrade.
Step 7
After completing the upgrade, log out of the NAM.