Cisco Network Analysis Module 6000 Installation And Configuration Manual Download Page 34

Page: 34 / 78

Catalyst 6000 Family Network Analysis Module Installation and Configuration Note

78-10406-05

Configuring the NAM

1931 bytes transferred in 0.02 sec (107.96k/sec)

Verifying cisco-nam-strong-crypto-patchK9-1.0-1.i386.rpm. Please wait...

Package cisco-nam-strong-crypto-patchK9-1.0-1.i386.rpm verified.

Applying /usr/local/nam/patch/workdir/cisco-nam-strong-crypto-patchK9-1.0-1.i386

.rpm. Please wait...

########################################### [100%]

Patch update completed successfully.

Step 2

After applying the patch, the

ip http secure

commands are enabled, and the following messages are

displayed:

Console> # ip http secure port 1777

Successfully changed HTTP secure port to 1777.

Step 3

Configure the HTTP port by entering this command:

root@localhost#

ip http secure port 8080

The HTTP server is enabled now. You must restart the

server to change HTTP port. Continue [y/n]?

The port number range is from 1 to 65535.

Note

Web root and guest user names are different from the CLI root and guest users.

Step 4

Enable the HTTP server by entering this command:

root@localhost#

ip http server enable

Enabling HTTP server...

No web users configured!

Please enter a web administrator username [admin]:

admin

New password:

Confirm password

User admin added.

Successfully enabled HTTP

server.

Generating Certificates

Certificates are used to validate the secure server connection. You can generate a self-signed certificate
or obtain and install a certificate from a certification authority.

Generate a self-signed certificate by entering this command:

Console> (enable)#

ip http secure generate self-signed-certificate

A certificate-signing request already exists. Generating a

new self signed certificate will invalidate the existing

signing request and any certificates already generated from

the existing request. Enter y to reuse the existing

certificate-signing request or n to generate a new one.

Reuse existing certificate-signing request?[y/n]

The HTTP server is enabled now. You must restart

to generate the certificate. Continue [y/n]?

-----BEGIN CERTIFICATE-----

MIIDAzCCAmygAwIBAgIBADANBgkqhkiG9w0BAQQFADBlMQswCQYDVQQGEwJBVTET

Summary of Contents for Network Analysis Module 6000















































































Search results

Summary of Contents for Network Analysis Module 6000

Reviews:

Related manuals for Network Analysis Module 6000

Brands by name

Popular brands

Cisco Network Analysis Module 6000, Installation And Configuration Manual

Search results

Summary of Contents for Network Analysis Module 6000

Reviews:

Related manuals for Network Analysis Module 6000

Brands by name

Popular brands