2-4
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
OL-29233-01
Chapter 2
Step 5
Using at least two people, one on each side of the box, lift and remove the three-sided box and place it
aside. The chassis is exposed on the pallet protected by a shipping bag secured with tape around the bag.
Step 6
Figure 2-3
shows the wooden box removed from the chassis and the protective bag still attached to the
chassis with tape.
Figure 2-3
Chassis Shipping Box Removed and Chassis Shipping Bag
Step 7
You need a ladder or step platform to remove the four top cover bolts (
Figure 2-4
). Use the 3/8-inch
ratchet wrench with an 11/16-inch socket to loosen the four bolts holding the top wood and frame
cushion system from the top of the shipping box. Once the four bolts are loosened, remove each bolt
manually and place aside, then remove the top wood and frame cushion system from the chassis.
1
Chassis pallet
4
Protective bag over chassis
2
Four bolts being removed from top shipping
cover
5
Tape around chassis perimeter
3
Top chassis shipping cover
2
2
2
2
5
209192
1
3
4
