3-3
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
OL-29233-01
Chapter 3
Verifying the Move Path
Warning
To reduce the risk of dolly instability, chassis damage, or personal injury, do not raise the equipment
more than 1 inch (2.4 cm) above the floor during transportation.
Statement 358
Warning
This dolly is designed to transport the equipment over short distances only.
Statement 359
Warning
In order to reduce the risk of chassis damage or personal injury when replacing a fully-loaded,
existing chassis, do not move the chassis in a configuration that is greater than the as-shipped
chassis. Before attaching the dolly and moving the chassis, remove the power system, fan trays, RP
cards, FCs, and LCs from the chassis.
Statement 367
Warning
To reduce the risk of dolly instability, chassis damage, or personal injury, do not transport the
equipment with the dolly raised higher than the maximum transport height shown on the dolly label,
and do not raise the equipment higher than required to remove the shipping pallet. For information
about maximum dolly heights, see the dolly instructions in this document.
Statement 368
Caution
Dolly wheel casters and anti-rotation pins should be in the locked position when the dolly is not in use.
Verifying the Move Path
Before moving the chassis, it is critical that you verify that the path that you are planning to use to move
the chassis to its final location can accommodate the chassis size and weight and the restrictions of the
chassis when using the dolly.
See
Table 3-1
for a list of the restrictions for your move path, and verify that you have sufficient room
for the
entire
move path prior to moving the chassis.
Table 3-1
Cisco NCS 6008 Chassis Move-Path Specifications
Specification
Value
Height (on dolly, with recommended 1 inch raise)
82 in. (208.3 cm)
Depth (on dolly, 90-degree dolly position)
70 in. (178 cm)
Depth (on dolly, 180-degree dolly position)
48 in. (122 cm)
Width (on dolly, 90-degree dolly position)
23.6 in. (60 cm)
Width (on dolly, 180-degree dolly position)
44 in. (112 cm)
Weight of chassis (as shipped, packaging removed)
775 lb (352 kg)
Weight of dolly
126 lb (57.3 kg)
Maximum recommended height from floor
(for chassis on dolly)
1.5 in. (3.8 cm)
