1-2
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
OL-29233-01
Chapter 1
Chassis Specifications
The chassis is shipped with the fan trays and Craft Panel already installed. A plastic panel covers
the rear card cage.
The drill hole template (Cisco product ID NC8-LCC-DRILLTEMP) is attached to the inside of the
shipping crate door.
•
Power components pallet—Contains the power components, including the Power Modules (PMs).
•
Primary card pallet—Contains the FCs, LCs, and RP cards.
•
Cosmetics pallet—Contains the default cosmetic components for the exterior of the chassis. This
pallet will also contain any optional cosmetic components for the exterior of the chassis, if ordered.
Chassis Specifications
Table 1-1
lists the physical specifications (dimensions and weight) for the Cisco NCS 6008 chassis (as
shipped and as installed without packaging).
Safety Guidelines
Caution
Before you perform any procedure in this document, review the safety guidelines in this section to avoid
injuring yourself or damaging the equipment.
The following guidelines are for your safety and to protect equipment. Guidelines do not include all
hazards. Be alert.
Note
Review the safety warnings listed in
Regulatory Compliance and Safety Information for the Cisco NCS
Network Convergence System
before installing, configuring, or troubleshooting any installed card.
Table 1-1
Cisco NCS 6008 Chassis Specifications
Physical dimensions (without packaging)
Height
81.0 in. (205.7 cm) as shipped
84.0 in. (213.4 cm) as installed with the “top cap”
(The top cap in the cosmetics package attaches to the
top of the chassis)
Width
23.6 in. (59.9 cm)
Depth
39.0 in. (99.1 cm) without doors and other cosmetics
42.0 in. (106.7 cm) with front and rear doors and
standard vertical cable troughs
Weight (without packaging)
775 lb (352 kg) chassis as shipped
840 lb (381 kg) chassis in shipping crate with pallet
1450 lb (658 kg) chassis fully loaded with power, fan
trays, cards, and cosmetics
