4-6
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
OL-6280-01
Chapter 4 Configuring and Managing Cisco MeetingPlace Video Integration
About Managing Video-Conferencing Resources
Maximum number of
video ports that users can
schedule for a
conference.
2 to the maximum number of
ports that can be scheduled in
advance. The number of ports
that can be scheduled in
advance is the total number of
ports minus the number of ports
designated as floater ports, plus
the number of overbook ports.
Entering a large number into
this field may limit the
availability of ports and
simultaneous conferences.
Entering 0 means that video
conferences cannot be
scheduled.
In MeetingTime, click the
Configure
tab, then
Scheduling Parameters
, then
scroll down in the panel on the right to
the
Video meetings
heading,
Max ports
per meeting
field.
Default number of video
ports to schedule for each
conference.
This number appears by
default in the
# of video
callers
field on the
scheduling form of users
whose profiles allow
them to schedule video
conferences. If users do
not change this value
when they schedule a
conference, this number
of video ports will be
scheduled for that
conference.
0 (zero), or any number
between 2 and the maximum
number of video ports in the
system that can be scheduled.
The number of ports that can be
scheduled in advance is the
total number of ports minus the
number of ports designated as
floater ports, plus the number of
overbook ports.
By default, this parameter is set
to zero.
Do not enter 1; Cisco
MeetingPlace will not schedule
a conference that specifies a
single video port.
Entering a large number into
this field may limit the
availability of ports and
simultaneous conferences.
In MeetingTime, click the
Configure
tab, then click
Scheduling Parameters
,
then scroll down in the panel on the right
to the
Video meetings
heading,
Default
# of ports to schedule
field.
Table 4-2
Conference and Port Parameters (continued)
Parameter Values
Where
Specified