
3-17
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
OL-6280-01
Chapter 3 Installing Cisco MeetingPlace Video Integration
Before You Install
Step 4
Click
Insert
.
Preparing to Install the Video Integration with DMZ Configurations
A DMZ is an area on the corporate network that is outside the corporate firewall. In order to allow
external participants to attend Cisco MeetingPlace conferences without compromising security, one or
more Cisco MeetingPlace Web Conferencing servers are deployed behind the firewall, and one or more
web-conferencing servers are deployed in a DMZ. These configurations are called “segmented meeting
access” (SMA) configurations; they are described fully in the
Administrator’s Guide
for
Cisco MeetingPlace Web Conferencing Release 5.3.
Cisco MeetingPlace Video Integration must be installed on one and only one server on which
Cisco MeetingPlace Web Conferencing is installed:
•
If it is installed behind the firewall, only internal participants can attend video conferences.
•
If it is installed in the DMZ, external participants can also attend.
Note
•
If Cisco MeetingPlace Video Integration is installed in the DMZ, meeting schedulers must allow
Internet access for all conferences that will include video, even if only internal participants will
attend. The web and video conferences will be held on the server in the DMZ.
•
If Cisco MeetingPlace Video Integration is installed behind the firewall in a DMZ configuration,
users cannot include video conferencing in a meeting that also includes web-conferencing
participants who are outside the firewall.
•
Additional caveats apply. See
Important Information About DMZ Configurations and Video
Conferencing, page 4-12
.
Step 1
Use the information in this section to decide whether you will install
Cisco MeetingPlace Video Integration behind the firewall or in the DMZ.
Parameter
Value
Route Pattern/Hunt Pilot
The MeetingPlace service prefix you defined on
the Cisco IPVC MCU, followed by an
exclamation point (
!
).
Description
The MeetingPlace Service on the
Cisco IPVC MCU, or a different name that
describes this route pattern.
Cisco CallManager 4.0:
Gateway or Route/Hunt List
Cisco CallManager 4.1:
Gateway or Route List
The IP address or hostname of the H225 Trunk
(Gatekeeper Controlled) that you created.
Provide Outside Dialtone
Uncheck this check box.
Other parameters.
Values as appropriate for your environment.