3-9
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
OL-6280-01
Chapter 3 Installing Cisco MeetingPlace Video Integration
Before You Install
Step 5
In the “Voice activate method” field, we recommend that you click
All see one
to have all participants
see the current speaker.
Step 6
To disable automatic switching of nonspeaking participants, uncheck
Enable auto-switch
.
Step 7
To save these conference-view parameters and to close the Edit View dialog box, click
OK.
Special Instructions for Accommodating SCCP Endpoints
Because SCCP endpoints require the H.263 format, special view settings are required. To set up views,
use the table in
Using Preconfigured Service Templates, page 3-5
as a model for setting parameters, or
use the appropriate procedure from this section.
If your users will attend via SCCP endpoints and your Cisco IPVC MCU has only an MP card, only the
Voice Activated view can be used. In this case, all participants will be able to use only the View Active
Speaker option available in the Cisco MeetingPlace meeting room. They will not be able to view multiple
people simultaneously.
Creating a Single Voice Activated View
Step 1
The default view should have the correct parameter settings. Verify that the settings are as follows:
Step 2
Click
OK
.
If your users will attend via SCCP endpoints and you have both an MP card and an EMP card, in order
for participants to be able to use both the View Active Speaker and the View Multiple People options
that are available in the Cisco MeetingPlace web-conferencing meeting room, both views are required.
The View Active Speaker option corresponds to the Voice Activated view, and View Multiple People
corresponds to the Continuous Presence view.
Creating Two Separate Views
Step 1
In the service, click the Views button to create the first view.
Step 2
Set the following parameters for this view:
Parameter
Value
Initial Layout
1-participant
layout
Max Layout
1-participant
layout
Use Processor
MP
Format
(in the
Video Schemes Settings
section) H.263
Other parameters
As desired