3-8
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
OL-6280-01
Chapter 3 Installing Cisco MeetingPlace Video Integration
Before You Install
Making Sure that a Conference Password Is Not Required
Step 1
Click the
Management
button.
The Management Settings dialog box appears.
Step 2
Make sure that password-related parameters are unchecked.
Step 3
Click
OK
.
The Add Services dialog box appears.
Setting Conference View Parameters
When you set view parameters, use the Cisco MeetingPlace service template as a model. The templates
are described in
Using Preconfigured Service Templates, page 3-5
. A Voice Activated view allows
participants to View Active Speaker, while a Continuous Presence view allows participants to View
Multiple People.
Note
•
One Voice Activated, 1-participant layout is required. A Continuous Presence view is optional, if
your hardware supports it.
•
Do not create multiple identical views for a single service code. Each view must be unique.
General Instructions for Setting View Parameters
Step 1
Click the edit view icon.
The Edit View dialog box appears.
Step 2
In the “Use Processor” field, click the type of media processor that you want this service to use.
Note
The
MP and RM
option
does not support Cisco MeetingPlace.
•
Click
MP
to specify that the service only uses the local media processor to process video conference
calls.
•
Click
EMP
to specify that the service uses the Cisco IPVC Enhanced Media Processor (EMP)
register with the Cisco IPVC MCU to process video conference calls.
•
Click
Auto
to allow the Cisco IPVC MCU to choose the media processor the Cisco IPVC MCU will
use to process a specific video conference.
Note
See
Cisco IP/VC 3511 MCU and Cisco IP/VC 3540 MCU Module Administrator Guide
,
Version 3.2 for information about registering a media processor with the Cisco IPVC MCU.
Step 3
In the “Video Picture Size” field, click the video format that you anticipate most endpoints will use.
Step 4
To enable the Cisco IPVC MCU to switch the video to the speaker who is speaking the loudest, check
Enable voice activate
.