Cisco Linksys WAG54GP2 User Manual Download Page 58

Page: 58 / 126

Chapter 4: Configuring the Gateway
The Administration Tab

Wireless-G ADSL Gateway with 2 Phone Ports

Firmware Upgrade

The ADSL Gateway allows you to upgrade firmware for the Gateway’s network functions.

To upgrade the Gateway’s firmware:

1. Click the

Browse

button to find the firmware upgrade file that you downloaded from the Linksys website and

then extracted.

2. Double-click the firmware file you downloaded and extracted. Click the

Upgrade

button, and follow the

instructions there.

Reboot

This tab allows you to do a soft or hard reboot of your Gateway.

Reboot Mode. To reboot your Gateway, select

Hard

Soft

. Choose hard to power cycle the Gateway or soft to

restart it without a power cycle.

To begin the reboot process, click the

Save Settings

button. When a screen appears asking you if you really

want to reboot the device. Click

Click the

Cancel Changes

button if you want to undo your changes.

Figure 4-46: Administration Tab - Firmware Upgrade

Figure 4-47: Administration Tab - Reboot

Summary of Contents for Linksys WAG54GP2































































































































Search results

Summary of Contents for Linksys WAG54GP2

Reviews:

Related manuals for Linksys WAG54GP2

Brands by name

Popular brands

Cisco Linksys WAG54GP2, User Manual

Search results

Summary of Contents for Linksys WAG54GP2

Reviews:

Related manuals for Linksys WAG54GP2

Brands by name

Popular brands