Cisco Linksys WAG54GP2 User Manual Download Page 54

Page: 54 / 126

Chapter 4: Configuring the Gateway
The Administration Tab

Wireless-G ADSL Gateway with 2 Phone Ports

SNMP

SNMP is a popular network monitoring and management protocol. To enable SNMP, click

Enabled

. To disable

SNMP, click

Disabled

If enabled, then specify the IP address(es) allowed to have SNMP access. Select

All

to allow all IP addresses with

no restrictions,

IP address

to specify a single IP address, or

IP range

to specify a range of IP addresses.

Device Name

. Enter the name of the Gateway.

Get Community

. Enter the password that allows read-only access to the Gateway’s SNMP information.

Set Community

. Enter the password that allows read/write access to the Gateway’s SNMP information.

SNMP v3: Rw User

. Enter the user name of the user with read/write access.

Authentication Protocol

. Select the method used to authenticate the read/write user.

Authentication Password

. Enter the actual password that will authenticate the read/write user.

Privacy Password

. Enter a second password for added security. This will be associated with the DES privacy

protocol.

Trap Management: Trap to

. Enter the IP address of the remote host computer that will receive the trap

messages.

UPnP

UPnP allows Windows XP to automatically configure the Gateway for various Internet applications, such as
gaming and videoconferencing.

UPnp

. To enable UPnP, click

Enable

Please select a PVC connection to bind

. The Gateway uses one Permanent Virtual Circuit (PVC) connection, so

select the number

from the drop-down menu.

Summary of Contents for Linksys WAG54GP2































































































































Search results

Summary of Contents for Linksys WAG54GP2

Reviews:

Related manuals for Linksys WAG54GP2

Brands by name

Popular brands

Cisco Linksys WAG54GP2, User Manual

Search results

Summary of Contents for Linksys WAG54GP2

Reviews:

Related manuals for Linksys WAG54GP2

Brands by name

Popular brands