Cisco Linksys WAG54GP2 User Manual Download Page 60

Page: 60 / 126

Chapter 4: Configuring the Gateway
The Status Tab

Wireless-G ADSL Gateway with 2 Phone Ports

Wireless

The Wireless network information that is displayed is the Wireless Firmware Version, MAC Address, Mode, SSID,
DHCP Server, Channel, and Encryption Function.

Click the

Wireless Clients Connected

button to view the wireless clients connected to the Gateway.

Click the

Refresh

button if you want to Refresh your screen. Click the

Close

button to close the screen.

DSL Connection

The DSL Connection information that is displayed is the Status, Downstream Rate, and Upstream Rate.

The PVC Connection information that is displayed is Encapsulation, Multiplexing, QoS, Pcr Rate, Scr Rate,
Autodetect, VPI, VCI, and PVC Status.

Click the

Refresh

button if you want to Refresh your screen.

Figure 4-50: Status Tab - Wireless

Figure 4-51: Status Tab - DSL Connection

Summary of Contents for Linksys WAG54GP2































































































































Search results

Summary of Contents for Linksys WAG54GP2

Reviews:

Related manuals for Linksys WAG54GP2

Brands by name

Popular brands

Cisco Linksys WAG54GP2, User Manual

Search results

Summary of Contents for Linksys WAG54GP2

Reviews:

Related manuals for Linksys WAG54GP2

Brands by name

Popular brands