Cisco Linksys E1200 User Manual Download Page 75

Page: 75 / 92

Maintaining and Monitoring

Linksys E-Series

To upgrade the router’s firmware:
For

E900

E1200

E1200V2 E1500

E2500

E3200

Linksys.com/support

Administration > Firmware Upgrade

Log into the browser-based utility (see “How to open the browser-based

utility” on page 25) .

Click the

Status

tab, then click the

Router

page and take note of the

current firmware version for your router .

Using your web browser, connect to

Linksys.com/support

, then find

your router model .

Click the

Downloads

tab, then select the hardware version for your

router from the

Select Hardware Version

drop-down list .

Compare the latest available firmware version on the website with your

current version . If there is a newer version, click

Release notes

to see if

the newer version contains new features you want or solves a problem

you are having .

If you want the new version, click

Download

and save the file to your

computer . Take note of the file location .

During the upgrade process, the router may lose the settings you have

changed . Make a backup of your router configuration

before

starting

the upgrade process . See “How to back up and restore your router

configuration” on page 61 .

In the browser-based utility, click the

Administration

tab, then click the

Firmware Upgrade

page .

Click

Browse

, then go to the location where you saved the upgrade file .

Select the upgrade file, then click

Start Upgrade

and follow the on-

screen instructions . The upgrade process begins, and a progress bar

appears . When the firmware has been uploaded, a new page opens with

an “Upgrade is successful” notice, and the router reboots .

To upgrade the router’s firmware:
For

E4200

Administration > Firmware Upgrade

Log into the browser-based utility (see “How to open the browser-based

utility” on page 25) .

Click the

Administration

tab, then click the

Firmware Upgrade

page .

Click

Check For Updates

, then follow the on-screen instructions for

installing any available updates .

TIP

To have your router automatically check for updates, select

Update

Automatically

. The router will check for updates at midnight

according to the time zone setting on the Basic Setup page . If an

update is found, it will be immediately installed, then the router will

restart .

Summary of Contents for Linksys E1200





























































































Search results

Summary of Contents for Linksys E1200

Reviews:

Related manuals for Linksys E1200

Brands by name

Popular brands

Cisco Linksys E1200, User Manual

Search results

Summary of Contents for Linksys E1200

Reviews:

Related manuals for Linksys E1200

Brands by name

Popular brands